This item has been sold, and the description, image and price ($US) are for reference purposes only.
A fluted pedestal, Tasmanian blackwood and pine, late 19th century, 43.70 in. high, 11.42 in. diameter

You must be a subscriber, and be logged in to view price and dealer details.

Register Now to view actual auction price for this item.

  • Blackwood - One of the best known and most widely used Australian timbers, blackwood (acacia melanoxylon), is a member of the Acacia (wattle) family and grows in eastern Australia from about Adelaide in South Australia, as far north as Cairns in Queensland.

    The largest, straightest and tallest trees come from the wet forest and swamps of north-west Tasmania where it is grown commercially.

    Blackwood timber colours range across a wide spectrum, from a very pale honey colour through to a dark chocolate with streaks of red tinge.

    The hardwood timber has been commonly used in the production of furniture, flooring, and musical instruments in Australia from the late 19th century. However, the straight grain timber is not the most prized or valuable, that honour falls to blackwood with a wavy, fiddleback pattern, which is used both in the solid and as a veneer. Fiddleback was only used on the finest examples of furniture.
  • Fluting - A form of decoration found on many pieces of furniture, as well as ceramics, silver and clocks, in which round-bottomed grooves, of varying width and depth, are let into columns, pilasters, legs. As a general rule, flutes are cut in the vertical, though they may follow a turned leg in a spiral pattern. In cross-section, they may be described as a series of 'U' shapes, rising and narrowing at each end of the groove. Fluting is the opposite of reeding, with which fluting is often associated.

This item has been included into following indexes:

A fluted pedestal, Tasmanian blackwood and pine, late 19th…