17th Century Continental Brass Table Clock with Alarm
A Continental polished brass horizontal table clock, 17th century, 30 hour fusee, verge escapement with alarm, engraved Arabic and Roman numeral dial, within a conforming square form brass case with glazed side apertures, later custom made hardwood carry case, the clock 2.95 in. high, 2.95 in. wide, 2.95 in. deep, the case 3.94 in. high, 3.54 in. wide, 3.54 in. deep
You must be a subscriber, and be logged in to view price and dealer details.
Register Now to view actual auction price for this item.
- Verge Escapement - A verge escapement is an early mechanical escapement used in clocks and other timekeeping devices. It is an early form of the escapement mechanism, which is used to regulate the movement of the hands of a clock or watch. The verge escapement consists of a vertical shaft called the verge, which is mounted on the clock's main plate. Attached to the verge are two pallets, which engage with the teeth of the escape wheel. As the escape wheel turns, the pallets alternately lock and release it, allowing the movement of the clock to be regulated. The verge escapement was widely used in early mechanical clocks, but it was eventually replaced by the more accurate and reliable anchor escapement.
- Fusee - The fusee movement was used in clocks and pocket watches from the mid 17th century. The fusee is a cone shaped drum within the works that is linked to the barrel of the spring, usually by a length of chain.
As the mainspring loses its tension over time, the cone shaped barrel compensates for this by increasing the tension, by pulling the mainspring tighter, thus ensuring the time remains constant.
Use of the fusee in clocks was superseded by the "going barrel" in the mid 19th century and for pocket watches at the beginning of the 19th century.
The fusee continued to be used in marine chronometers until the 1970s.
This item has been included into following indexes:
