This item has been sold, and the description, image and price ($US) are for reference purposes only.
18ct gold open face consular cased pocket watch by Edward Powell, Bristol, case hallmarked London 1800, bullseye glass, white enamel dial with Arabic numerals, minute indices, winding hole at 4, original gold hands (tiny chip at centre). fusee chain movement with lever escapement, pierced and engraved balance cock, very crisp condition. Total weight 94gm.

You must be a subscriber, and be logged in to view price and dealer details.

Register Now to view actual auction price for this item.

  • Movement - The technical name for the workings of a clock or watch, and does not include the dial or case.
  • Fusee - The fusee movement was used in clocks and pocket watches from the mid 17th century. The fusee is a cone shaped drum within the works that is linked to the barrel of the spring, usually by a length of chain.

    As the mainspring loses its tension over time, the cone shaped barrel compensates for this by increasing the tension, by pulling the mainspring tighter, thus ensuring the time remains constant.

    Use of the fusee in clocks was superseded by the "going barrel" in the mid 19th century and for pocket watches at the beginning of the 19th century.

    The fusee continued to be used in marine chronometers until the 1970s.
  • Lever Escapement - A lever escapement is a type of escapement mechanism used in mechanical clocks and watches to regulate the timekeeping of the movement. It was invented by British clockmaker Thomas Mudge in the 18th century and is now widely used in modern mechanical timepieces.

    The lever escapement consists of three main parts: the escape wheel, the pallet fork, and the lever. The escape wheel is a wheel with teeth that is driven by the clock or watch's main spring or weight. The pallet fork is a two-pronged component that is positioned so that it can engage with the teeth of the escape wheel, and the lever is a small, L-shaped component that is attached to the pallet fork.

    When the escape wheel turns, one of its teeth pushes against one of the pallet fork's prongs, causing the fork to pivot. As the pallet fork pivots, it releases the tooth and engages with the next tooth on the opposite side of the escape wheel. At the same time, the lever, which is connected to the pallet fork, rocks back and forth, allowing the escape wheel to turn at a regulated rate.

    The lever escapement is prized for its accuracy and reliability and is commonly used in high-end mechanical watches. It allows for precise timekeeping by ensuring that the movement of the watch or clock is regulated and consistent, and its compact size makes it an ideal choice for use in small, portable timepieces.

This item has been included into following indexes:

18ct gold open face consular cased pocket watch by Edward…