This item has been sold, and the description, image and price ($US) are for reference purposes only.
A rare glazed corner display cabinet with brass glazing bars and bevelled edge glass panels, in a blackwood frame

You must be a subscriber, and be logged in to view price and dealer details.

Register Now to view actual auction price for this item.

  • Panels - Timber pieces, usually of well-figured wood either recessed or applied over the frames of doors and as decoration elsewhere in the carcase of cabinet furniture. The panels may take a variety of shapes rectangular, square, shield shape, oval, half-round or in the form of Egyptian pylons.
  • Glazing Bars - Thin astragal mouldings, almost always of timber, behind which glass panes in bookcases, china cabinets, kitchen dressers, and so on are fixed. The glass is either puttied in or held by thin beads. Old hand-made glass should show imperfections, such as bubbles and ridges when looked at obliquely against the light, something which is not found in modem factory-made glass. The joints of the glazing bars should always be neatly mitred.

    A cheap shortcut is to apply false glazing bars over a single pane of glass, and this indicates either an item of modern manufacture, or a later conversion, where the panelled door of a press or wardrobe has had a glass front fitted, and the article turned into a 'bookcase'.
  • Bevel / Chamfer - In furniture making, a chamfered corner refers to a technique used to create a smooth, angled edge on the corner of a piece of furniture. This is typically done by cutting away a small portion of the corner at an angle, typically 45 degrees, creating a diagonal edge, rather than a sharp 90-degree angle. This technique can be used on various parts of a piece of furniture such as table legs, drawer fronts, or door frames. Chamfering can add visual interest to a piece and can help to soften the overall look of a piece of furniture. It is often used in conjunction with other techniques, such as rounding edges or using contrasting wood species to create a more elegant, sophisticated look. Chamfering is a simple way to add a touch of elegance to a piece of furniture and it is a common technique used by furniture makers.
  • Blackwood - One of the best known and most widely used Australian timbers, blackwood (acacia melanoxylon), is a member of the Acacia (wattle) family and grows in eastern Australia from about Adelaide in South Australia, as far north as Cairns in Queensland.

    The largest, straightest and tallest trees come from the wet forest and swamps of north-west Tasmania where it is grown commercially.

    Blackwood timber colours range across a wide spectrum, from a very pale honey colour through to a dark chocolate with streaks of red tinge.

    The hardwood timber has been commonly used in the production of furniture, flooring, and musical instruments in Australia from the late 19th century. However, the straight grain timber is not the most prized or valuable, that honour falls to blackwood with a wavy, fiddleback pattern, which is used both in the solid and as a veneer. Fiddleback was only used on the finest examples of furniture.
  • Astragal / Glazing Bars - An astragal, bead or glazing bar is the term used to describe the wooden strips that divide the glass in a cabinet into sections. However it can also refer to the narrow beading on a multi-door cabinet or bookcase that covers the gap between the doors, when they are closed. The astragal is usually attached to the inner stile of the left-hand door (or the right hand as you look at it).

This item has been included into following indexes:

A rare glazed corner display cabinet with brass glazing bars…