18th Century Wine Glasses (or) Antique Wine Glasses
Two early 18th century wine glasses. One with thistle bowl and faceted stem circa 1720, the other with round funnel bowl, folded foot, engraved with fruiting vines and bird circa 1725, 5.91 in. and 17.5 high (2)
You must be a subscriber, and be logged in to view price and dealer details.
Register Now to view actual auction price for this item.
- Stem - In drinking glasses the stem is that section of the glass that joins the bowl to the foot. In mass produced glasses is usually solid and of cylindrical shape, but in antique drinking glasses it may be long and short and in various styles or with decoration, such as air twist, baluster, collared, faceted, hollow, knopped, teardrop, twisted or incised.
- Folded Foot - A drinking glass with a rounded edge to the foot, where the foot is effectively double-layered by turning it, usually under but sometimes over and then flattened , against the disk of the foot, to provide extra stability and reduce the risk of chipping or breakage.
The technique originated in Venice during the Renaissance and was adopted by English glassmakers who continued to fold the feet of drinking glasses and bowls until c1750. - Circa - A Latin term meaning 'about', often used in the antique trade to give an approximate date for the piece, usually considered to be five years on either side of the circa year. Thus, circa 1900 means the piece was made about 1900, probably between 1895 and 1905. The expression is sometimes abbreviated to c.1900.
- Bowl - With drinking glasses, the bowl is the hollow section of the glass that holds the liquid. Many glasses were mounted on a stem joined to a foot, others were cylindrical, of tumbler shape. The size and shape of the bowl was determined by the type of liquids they were meant to hold. Shapes used included bell shaped, conical (funnel), bucket shaped, trumpet, cup, ogee, funnel, cylindrical and rounded.
- Engraved Glass - The method of decorating glass by marking the surface with a sharp intrument such as a diamond, metal needle or rotating cutting wheel. As pressure is applied to the surface, best results for engraving are achieved if the glass is of sufficient thickness. In the 19th century etching was used to decorate some table glassware that was too fine to take an engraving tool.
This item has been included into following indexes:
